You are:
Private
star_border

Facade renovation - strong absorbent render

In the case of an extremely absorbent facade, it is necessary to apply a primer prior to applying the final finish.

2 steps to a new facade

Before applying a new surface finish, apply a special Baumit MultiPrimer coat and then apply a new high quality facade paint.

Step 1

Silno nasiakavý podklad

Applying of the basic coat Baumit MultiPrimer.

Step 2

Nová fasádna farba

Coat by a new facade paint Baumit StarColor, NanoporColor, SilikonColor.

Step by step working instructions

1. What do we need?

Obnova fasády - silno nasiakavý podklad

We will need a Baumit MultiPrimer primer, a paint roller, a container, a facade roller, or equipment for machine facade painting to compensate for substrate absorption.

2. Facade cleaning

Vyčistenie fasády

The surface of the facade must be firm and cohesive, free of algae and cracks. Brush or pressure wash the dusty and dirty facade. Remove any peeling parts. If the facade still has other deficiencies, it is necessary to remove them first.

3. Primer

Základn náter, hĺbkový základ

Depending on the absorbency of the render, dilute the primer with water 1:1 to 1:5 and mix well.

4. Product application

Penetrácia na silno nasiakavý podklad

Apply the primer using a brush, a roller, or spray. When applying multiple layers, always apply to a dry layer. Curing time before applying further surface finish is at least 12 hours.

5. New facade coat

Nová fasádna farba

We apply two layers of high quality facade paint to the clean facade. The first coat is applied diluted with 10 - 15% water. After a break of a min. of 12 hours we apply 1 to 2 coats of the facade paint as required. Allow a min. of 4 hours between each coat.

6. Facade paint spraying

Striekanie fasádnej farby

Baumit facade paint may also be applied using airless spraying. It allows fast and even application of the facade paint in a short time even on large uniform surfaces.

Baumit products

Instructional video