Remove the peeling pain with a spatula before applying the new facade paint. Smooth the surface irregularities using a renovation render.
Physically remove the peeling paint and clean the facade. The resulting uneven surface is rendered and a new quality facade plaster is applied.
Physically remove the peeling paint and clean the facade.
For better adhesion and bonding of the render, apply Baumit MultiPrimer bonding primer.
Render the facade using Baumit MultiWhite and insert the glass fiber net.
Once the new render matured, apply a new facade paint, Baumit StarColor, NanoporColor or SiliconColor.
Prepare the Baumit MultiWhite renovation render, fiber glass net, Baumit MultiPrimer bonding primer, spatula, anti-corrosive smoother, masonry spoon, hard bristle brush, suitable mixing bowl.
The surface of the facade must be firm and cohesive, free of algae and cracks. Physically remove the peeling paint using a spatula. Brush or pressure wash the dusty and dirty facade. If the facade still has other deficiencies, it is necessary to remove them first.
See: Render preparation
Depending on the absorbency of the render, dilute the Baumit MultiPrimer bonding primer with water 1:1 to 1:5 and mix well. Apply the primer onto the render using a brush, a roller, or spray. When applying multiple layers, always apply to a dry layer. Curing time before applying the render is at least 12 hours.
Apply the Baumit MultiWhite to the dry render using an anti-corrosion toothed smoother and insert the fiberglass mesh. After slight drying of the first layer, apply the second thin layer and after sufficient drying, treat the surface structure by a polystyrene, felt or foam smoother. Render width 3 - 5 mm.
We apply two layers of high quality facade paint to the clean facade. The first coat is applied diluted with 10 - 15% water. After a break of a min. of 12 hours we apply 1 to 2 coats of the facade paint as required. Allow a min. of 4 hours between each coat.
Baumit facade paint may also be applied using airless spraying. It allows fast and even application of the facade paint in a short time even on large uniform surfaces.
Alkaline resistant, glass fibre textile mesh to be used in Baumit ETICS.
Water vapour permeable primer for solidification of mineral and organic surfaces, before application of Baumit facade plasters and paints. Solvent-free.
High quality facade paint with siloxane base offers high covering power and is easy to apply. Vapour permeable, water repellent and can be universally used.
Self-cleaning, pollution resistant, silicate based paint. New `photocat´technology creates maximum protection against contamination using the power of light. Mineralic and highly vapour perme
Ready-to-use paint for on silicone resin basis for indoor and outdoor use.