The system Baumit Pro offers approved quality, facade protection and pleasant internal climate. It connects in itself long years experience and excellent insulation properties with the best price-quality ratio. It is intended for the field of new buildings and also by reconstruction. With Baumit Pro you will get economically convenient thermal insulating system for common use.
If you are planning building of more family houses, renovation of multi-family houses or other bigger projects, the Baumit Pro system is a professional solution for you. Adhesive mortar Baumit ProContact is elastic, resistant to weather conditions, suitable for using in common conditions during realization and also its whole life, especially in case of increased demands for economical effectiveness of the solution. When you lay stress not only on functionality and aesthetic but also price is an important factor by decision-making, then the Baumit Pro system is the ideal solution.
Adhesive smoothing Baumit ProContact is suitable for gluing and also smoothing of insulating plates of mineral wool and also polystyrene. Exchanging of these insulants on a facade because of fire regulations is therefore simple with the Baumit Pro system, without necessity of considering a change of adhesive smoothing.
In case of uneven bases and providing a bigger thickness of glued joints it is possible to use also a more affordable adhesive mortar Baumit PaneloFix for gluing.
Insulating panels, made from EPS (expanded polystyrene) ganulated foam plastic
Baumit StarTrack Red allow a good adhesion without additional fixing for Baumit Open - KlimaFaçade and for Baumit ETICS
Alkaline resistant, glass fibre textile mesh to be used in Baumit ETICS.
Pre-treatment primer for mineral-based and paste-form decorative plasters. Works as absorption compensation and as a bonding agent for subsequent coating for plaster and thermal insulatation
Ready-to-use, synthetic resin render for exterior use. Water vapour permeable and very resistant to water. Use with Baumit SpeedTop additive.
1. Base - new masonry or original base
2. Gluing - adhesive smoothing Baumit ProContact or PaneloFix
3. Insulating plates - mineral insulating plates with longitudinal or sheer fibre (so called lamellas)
4. Anchoring - anchors with steel spine, min. number of anchores 6 pcs/m2
5. Levelling layer - adhesive smoothing Baumit ProContact
6. Reinforcing layer - adhesive smoothing Baumit ProContact with inserted glass-textile grid Baumit StarTex
7. Penetrating coating - Baumit UniPrimer or PremiumPrimer
8. Facade mortar - Baumit NanoporTop, Baumit StarTop, Baumit SilikonTop, SilikatTop, PuraTop, CreativTop
1. Base - new masonry or original base
2. Gluing - adhesive smoothing Baumit ProContact or PaneloFix
3. Insulating plates - polystyrene insulating plates EPS-F
Anchoring - anchores with steel or plastic spine according to the base type, min. number of anchores 6 pcs/m2
4. Reinforcing layer - adhesive smoothing Baumit ProContact with inserted glass-textile grid Baumit StarTex
5. Penetrating coating - Baumit UniPrimer or PremiumPrimer
6. Facade mortar - Baumit NanoporTop, Baumit StarTop, Baumit SilikonTop, SilikatTop, PuraTop, CreativTop, Baumit GranoporTop